Lenoxx Electronics CD Player CD625 User Manual

AM/FM STEREO RADIO  
PROGRAMMABLE CD PLAYER  
MODEL CD-625  
OPERATING INSTRUCTIONS  
BUILT-IN AM/FM RADIO RECEIVER  
PLAYS MUSIC COMPACT DISCS  
6 DIGIT LCD VISUAL DISPLAY  
TRACK REPEAT & DISC REPEAT  
BASS BOOST SYSTEM  
DELUXE STEREO HEADPHONES INCLUDED  
USES 2 SIZE “AA” BATTERIES (NOT INCLUDED)  
PLEASE READ CAREFULLY BEFORE USE  
IB-CD625(CDR92C-0L8)-WM-E-121803  
 
POWER SOURCES  
Power this player by connecting an optional (not included) AC ADAPTOR or by inserting  
2 size “AA” fresh alkaline batteries.  
NOTE: Before you buy an AC Adaptor, please note the only AC ADAPTOR suitable for  
this player is DC 4.5V 600mA, with polarity  
, others may damage the  
player. Please check voltage & current (mA) before buying an AC ADAPTOR.  
Using with Batteries  
Insert two size “AA” alkaline batteries  
according to the + and - markings on  
the bottom of the set.  
TIPS ON BATTERY USE  
Reversing polarities will damage the batteries and possibly this set. Be sure to  
follow polarity ( + and - ) as indicated.  
Do not mix different types together (Alkaline, Carbon-Zinc, Nickel-Cadmium etc.),  
or old batteries with new ones.  
When not in use for an extended period of time, or while internal batteries will not  
be used, remove them to prevent possible acid leakage or corrosion resulting in  
damage to this player.  
When the batteries have become discharged, they must be disposed of in a safe  
manner that complies with all applicable laws.  
Installation of batteries should only be done by an adult (for safety).  
ALKALINE BATTERY LIFE  
Bear in mind that battery life expectancy is based upon volume and bass listening  
levels.  
Maximum battery power consumption happens at maximum settings. Typical life  
for 2 size “AA” fresh alkaline batteries is above 8 hours of continuous use for CD  
play and 5 hours longer for radio use.  
WHEN  
SHOWS OR FLASHES IN THE DISPLAY  
While CD playing, if the alkaline batteries are weak and discharged, this symbol  
” shows or flashes in the display, then the power automatically turns off. If this  
occurs, replace the alkaline batteries (also if the display does not show anything,  
the batteries are dead).  
NOTE 1: The display is blank when you listen to the radio, so when the display  
does not show anything, please check if the CD/OFF/RADIO FUNCTION  
switch is moved to the CD position.  
NOTE 2: The radio may work normally for about 5 hours when “  
” shows or  
flashes in the display indicating batteries are weak for CD play, but still  
OK for the radio.  
NOTE 3: You may use rechargeable batteries on this set. However, because  
rechargeable batteries generally have lower voltage (1.2 volts instead of  
1.5 volts). Your playing time will be much less than normal fresh alkaline  
batteries.  
2
IB-CD625(CDR92C-0L8)-WM-E-121803  
 
DISC PLAYING  
1 Slide the CD/OFF/RADIO  
FUNCTION switch to CD  
position.  
CD/OFF/RADIO  
FUNCTION  
SWITCH  
2 Load the disc.  
Push  
here  
Disc  
SLIDE TO OPEN  
LABEL SIDE UP  
3 Connect the headphones.  
STEREO  
HEADPHONES  
TO PHONES JACK  
4 Press the PLAY/PAUSE button (  
indicator will light up.  
), the POWER ON  
PLAY/PAUSE  
BUTTON  
POWER ON  
INDICATOR  
TRACK NUMBER  
CURRENTLY  
PLAYING  
ELAPSED PLAYING  
TIME OF THE  
CURRENT TRACK  
5 Adjust the volume.  
VOLUME  
MAXIMUM  
MINIMUM  
VOLUME CONTROL  
3
IB-CD625(CDR92C-0L8)-WM-E-121803  
 
OTHER OPERATIONS  
Operation  
Display window shows  
Press  
To pause play  
PLAY/PAUSE button  
TRACK NUMBER  
CURRENTLY  
PLAYING  
ELAPSED TIME  
FLASHES  
To release pause and  
resume play  
PLAY/PAUSE button  
STOP button  
TRACK NUMBER  
CURRENTLY  
PLAYING  
PLAYING TIME  
ADVANCES  
To stop play  
TOTAL TRACKS  
TOTAL PLAYING  
TIME  
Slide the CD/OFF/RADIO FUNCTION switch to  
OFF position, or press the STOP button quickly  
twice.  
To turn off the power  
To skip to the next  
track(s)  
once (or repeatedly)  
To skip to the previous  
track(s)  
once (or repeatedly)  
Keep  
depressed and release it when the  
desired music section of the disc is found.  
If you press and hold the SKIP button (  
)
To go ahead at high  
speed (search forward)  
while the last track is playing, and the end of the  
track is reached, the music stops and the display  
will show the total tracks and total playing time of  
the CD, then power will shut itself off after 30  
seconds.  
To go back at high  
speed (search back-  
ward)  
Keep  
depressed and release it when the  
desired music section of the disc is found.  
Get into Stop Mode  
Press the PLAY/PAUSE button  
, the set  
begins to play, then press the STOP button  
,
the display will show six digits similar to the  
example on the right.  
TOTAL TRACKS  
TOTAL PLAYING  
TIME  
Auto power off function  
The power turns off automatically 30 seconds after all tracks on the disc have been  
played or after the STOP button is pressed to stop play.  
To shut off the power immediately, press the STOP button twice or slide the CD/OFF/  
RADIO FUNCTION switch to OFF position.  
4
IB-CD625(CDR92C-0L8)-WM-E-121803  
 
REPEAT, INTRO AND RANDOM PLAY  
You may have repeat, intro or random play using the REPEAT button. Press the REPEAT  
button several times, and the display will show the followings in turn:  
REPEAT ONE  
REPEAT ALL  
INTRO  
RANDOM  
NORMAL PLAY  
SINGLE TRACK REPEAT  
Plays one song over and over till you press STOP.  
/
SKIP SEARCH  
/
SKIP SEARCH  
During play, select the song you want to repeat with  
either of the SKIP/SEARCH buttons (  
or  
),  
then press the REPEAT button once, the symbol  
REPEAT ONE appears in the display.  
The song currently playing will repeat over and over,  
until you press STOP.  
REPEAT ONE  
ALL TRACKS REPEAT (DISC REPEAT)  
Repeats all songs in order till you press STOP.  
During play, press the REPEAT button twice, the  
symbol REPEAT ALL will show in the display.  
All songs will keep playing in sequence 1, 2, 3, etc.  
and when finished, will start all over again until you  
press the STOP.  
REPEAT  
ALL  
INTRO PLAY  
This plays the first 10 seconds of songs in sequential  
order.  
1. During play, press the REPEAT button three times,  
the word INTRO will flash in the display.  
2. Press the PLAY/PAUSE button, the word INTRO  
will stop flashing and the first 10 seconds of each  
song on the CD will play in sequential order.  
3. When you find a song you like, press the PLAY/  
PAUSE button, normal play will be resumed, that  
song (and the following songs) will play normally.  
INTRO  
RANDOM PLAY  
This plays the songs on the disc in a random order.  
1. During play, press the REPEAT button four times,  
the word RANDOM will flash.  
2. Press the PLAY/PAUSE button, this will play all of  
the songs in random order selected by the CD  
player. The RANDOM will stop flashing.  
RANDOM  
3. Press the SKIP/SEARCH button  
to skip to the  
next random song.  
5
IB-CD625(CDR92C-0L8)-WM-E-121803  
 
PROGRAMMED PLAY  
The tracks (songs) on the disc can be programmed (arranged in advance) to play in  
any order you prefer (up to 20 tracks can be programmed).  
Programming Example  
Program Number  
etc.  
etc.  
1
3
4
1
7
1
2
5
3
8
6
4
5
2
8
1
Track Number (song number)  
During programming, the word PROGRAM flashes in the display. To program  
songs to play in your preferred order, follow steps below:  
1. Press the PROGRAM button once.  
3. Press the PROGRAM button to confirm.  
The track 3 is now programmed.  
X 1  
X 1  
PROGRAM  
PROGRAM  
Program #2 will now show in the  
display, ready for your next selection of  
The word “PROGRAM” and “  
in the display.  
” will flash  
track.  
PROGRAM  
PROGRAM  
4. Repeat steps 2 and 3 to program other  
tracks till you finish (up to 20 selections).  
5. After programming is finished, press  
PLAY/PAUSE to begin programmed play.  
The word PROGRAM show in the display  
or  
and music begins.  
Program number  
2.Press the SKIP/SEARCH button (  
) to select track number 3 (example).  
the “PROGRAM” and “ ” will flash in the  
display.  
PROGRAM  
NOTE:  
/
SKIP SEARCH  
/
SKIP SEARCH  
- The player will stop automatically after  
all programmed tracks have been  
played.  
- To quit programmed play, press STOP  
button once. Then you may press  
PLAY button to re-start normal play.  
PROGRAM  
Your programmed memory will be lost:  
When the alkaline batteries are  
exhausted or removed, or the AC  
ADAPTOR is disconnected.  
Track number  
When the power is off, or the CD DOOR  
is opened.  
6
IB-CD625(CDR92C-0L8)-WM-E-121803  
 
RADIO OPERATION  
1 Slide  
the  
CD/OFF/RADIO  
FUNCTION switch to RADIO  
position, the POWER ON  
indicator will be turned on.  
CD/OFF/  
RADIO  
FUNCTION  
SWITCH  
POWER ON  
INDICATOR  
2 Select AM, FM or FM STEREO  
with the AM/FM/FM STEREO AM/FM/FM STEREO  
BAND switch.  
BAND SWITCH  
3 Rotate the TUNING CONTROL  
to select your favorite radio  
station.  
AM/FM  
DIAL LENS  
NOTE: If you tune into an FM  
stereo station, the  
FM STEREO indicator  
will be turned on.  
FM STEREO  
INDICATOR  
TUNING  
CONTROL  
4 Adjust the volume.  
VOLUME  
VOLUME  
CONTROL  
MAXIMUM  
MINIMUM  
5 If you prefer more bass, slide  
the BASS BOOST switch to  
ON position.  
NOTE:The BASS BOOST  
switch is on the  
bottom of the set.  
6 To turn off the radio, slide the  
CD/OFF/RADIO FUNCTION switch  
to the OFF or CD position.  
7
IB-CD625(CDR92C-0L8)-WM-E-121803  
 
MAINTENANCE  
Handling Compact Discs  
Cleaning the lens  
Dirty, scratched or warped discs may  
A dirty lens will cause sound skipping. If  
the lens is very dirty, the player may not  
work. We suggest using a special cleaning  
disk (not included) available in most music  
and Hi-Fi stores. However, if you do not  
have one, you may use the instructions  
below.  
cause skipping or noise.  
Handle the disc only by the edges. To  
keep clean, do not touch its surface.  
Discs should be stored in their cases  
after use to avoid scratches.  
Do not expose discs to direct sunlight,  
Use a cotton swab very slightly dampened  
with alcohol to clean the lens.  
high humidity, high temperatures, or  
dust, etc. Prolonged exposure to  
extreme temperatures can warp the disc  
(such as leaving the discs in your car  
during summertime).  
Cleaning the cabinet  
Wipe with a soft cloth. If the cabinet is  
very dirty, dampen (not dripping wet) the  
cloth with a weak solution of soapy water,  
and then wipe clean.  
Do not stick or write anything on either  
side of disc. Sharp writing instruments,  
or the inks used in some felt-tipped pens,  
may damage its surface.  
Cleaning the Discs  
To remove the Disc  
Fingerprints should be carefully wiped  
Open the CD DOOR by sliding the CD  
DOOR OPEN button, hold the disc by the  
edge while slightly pressing on the center  
spindle as illustrated, then lift it from the  
edge to release and remove.  
from the surface of disc with a soft cloth.  
Unlike conventional records, compact  
discs have no grooves to collect dust  
and microscopic dirt, so gently wiping  
them with a soft cloth should remove  
most particles. Wipe in a straight  
motion from the center to the edge.  
NOTE:  
Always press STOP button and wait for  
the disc to stop rotating before sliding the  
CD DOOR OPEN button to remove the  
disc.  
Never use thinner, benzine, record  
cleaner or antistatic spray on a compact  
disc. Such chemicals can damage its  
plastic surface.  
8
IB-CD625(CDR92C-0L8)-WM-E-121803  
 
SAFETY PRECAUTIONS  
Do not take the set apart. The laser beam used in the set may harm your eyes. Refer  
servicing to qualified service personnel only.  
Do not insert pins or coins, clips, or any objects inside the set.  
This set is equipped with a safety device which automatically turns the laser beam off  
when the disc door is opened.  
Do not drop the set or subject it to strong shocks. Doing so could result in damage.  
Do not place the set in locations where the temperature is high, or in humid or dusty  
locations, or locations with long heavy vibrations, or tilted surfaces.  
The set’s cabinet may warp or the set may otherwise be damaged if it is placed in direct  
sunlight, near heaters (where the temperature is 1400F/600C or higher) or in cars with  
the windows closed. In the summer, the temperature may get as high as 2120F/1000C  
or more.  
Use the set within a temperature range of 410F/50C to 950F/350C.  
Use ONLY the DC 4.5V 600mA AC Adaptor with polarity  
, others may damage  
this set. Disconnect the Adaptor from the wall outlet when the set is not to be used for  
an extended period of time (3 days or more).  
When cleaning this set, use a soft dry cloth. Do not use solvents or commercially  
available cleaners, as they may damage or discolor the finish.  
Do not wear headphones while operating a motor vehicle. This could create a traffic  
hazard and is illegal in many areas. Do not use this set when bicycling or running.  
The headphones supplied with this set provide superb stereo listening while allowing  
you to hear some outside sounds when listening at normally low volume levels. Listening  
at extremely high volume levels minimizes the intrusion of outside noise/sounds. In the  
interest of safety, it is strongly advised against the use while engaging in activities  
where the exclusion of external sounds (whistles, horns, sirens, traffic, etc.) could be  
hazardous. Also loud volume can hurt your ears. If you notice that the sound has  
become weak or distorted or if tracks do not change, this is an indication that the  
batteries are low. Replace both batteries at the same time (see BATTERY OPERATION).  
This CD-625 is identified by a serial number located in the BATTERY COMPARTMENT.  
Record this number in the space provided below.  
Model CD-625 Serial No.  
Date Purchased:  
This Instruction Manual contains detailed information on its safety and use. Please  
read it carefully so that you may take full advantage of its many features, and ensure  
a safe reliable operation. Keep this Instruction Manual for future reference.  
CONDENSATION  
If cold water is poured into a glass, water droplets form on the outside of the glass.  
This is called condensation. Condensation may occur on internal operating parts of the  
lens.  
Condensation occurs:  
When the set is brought from the cold outdoors into a warm room, or if it is in a cold  
room to a room which is heated, or in the summer, if the set is moved from an air-  
conditioned room or car to a hot or humid location.  
Should condensation occur, the set may not operate properly. Open the CD DOOR  
and wait for about 20 minutes (to allow the internal parts to adjust to the surrounding  
temperature) before using the set.  
9
IB-CD625(CDR92C-0L8)-WM-E-121803  
 
IMPORTANT INFORMATION REQUIRED BY THE FCC  
Since the CD circuitry may cause interference to other radios nearby, switch this  
set off when not in use or move it away from the affected radios.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the  
following two conditions: (1) This device may not cause harmful interference, and  
(2) This device must accept any interference received, including interference that  
may cause undesirable operation.  
NOTE: This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful interference  
in a residential installation. This equipment generates, uses and can radiate  
radio frequency energy and, if not installed and used in accordance with  
the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
SAFETY CERTIFICATION  
This AM/FM Compact Disc Player is made and tested to meet safety standards of the  
FCC requirements and compliance with safety performance of the U.S. Department of  
Health and Human Services, and also with FDA Radiation Performance Standards 21  
CFR Subchapter J.  
WARNING  
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.  
LASER SAFETY  
THIS SET EMPLOYS AN OPTICAL LASER BEAM SYSTEM IN THE CD MECHANISM,  
DESIGNED WITH BUILT-IN SAFEGUARDS. DO NOT ATTEMPT TO DISASSEMBLE.  
EXPOSURE TO THIS INVISIBLE LASER LIGHT BEAM MAY BE HARMFUL TO HUMAN  
EYES. THIS IS A CLASS-1 LASER PRODUCT. USE OF ADJUSTMENTS OTHER THAN  
THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS LASER LIGHT BEAM  
EXPOSURE. THIS COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR  
REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE PERSONNEL. THE LASER  
MECHANISM IN THE SET CORRESPONDS TO THE STYLUS (NEEDLE) OF A RECORD  
PLAYER. ALTHOUGH THIS PRODUCT USES A LASER PICK-UP LENS, IT IS  
COMPLETELY SAFE WHEN OPERATED ACCORDING TO DIRECTIONS.  
10  
IB-CD625(CDR92C-0L8)-WM-E-121803  
 
TROUBLE SHOOTING GUIDE  
Symptoms  
Causes  
Solutions  
Replace both batteries with fresh  
alkaline batteries. Battery life with  
fresh batteries is above 8 hours for  
continuous CD play and 5 hours longer  
for radio use (rechargeable batteries  
have 1/2 of that life).  
Tracks do not  
change or set  
does not play  
normally.  
Batteries are weak (they  
may test OK on tester but  
they are weak for CD  
operation).  
Replace both batteries with fresh  
ones.  
Dead or weak batteries.  
CD Player will not  
turn on.  
Check the optional AC ADAPTOR  
connection at AC outlet and the rear  
of the set.  
The optional AC ADAPTOR  
not connected properly.  
Re-insert disc with label side facing  
up.  
Disc inserted incorrectly.  
Defective compact disc.  
CD DOOR not closed.  
Try another compact disc.  
Close the door securely.  
Disc will not play.  
Take out the CD disc and leave the  
CD Door open for about 20 minutes  
to dry the moisture condensation.  
Moisture has formed inside  
the CD deck.  
VOLUME control set to  
minimum.  
Increase the volume.  
No sound from  
headphones.  
Replace with fresh batteries or use  
the optional AC ADAPTOR.  
Weak batteries.  
Defective compact disc.  
Try another compact disc.  
Sound is skipping  
or sound stops.  
The compact disc or lens  
is dirty or CD is scratched.  
Clean or replace the compact disc  
or clean the lens.  
Music is too loud.  
Lower the VOLUME control.  
Slide BASS BOOST switch to OFF.  
BASS BOOST is ON.  
Replace both batteries or use the  
optional AC ADAPTOR.  
Sound is distorted.  
Weak batteries.  
Remove batteries and the optional  
AC ADAPTOR. Wait 15 seconds  
and re-insert. Make sure batteries  
are fresh or the optional ADAPTOR  
has power.  
Electronic or static error  
caused circuitry to lock.  
Buttons do not  
work.  
FUNCTION switch is in the  
CD or OFF position.  
Radio does not  
work.  
Slide the FUNCTION switch to the  
RADIO position.  
The FM Antenna is built-into Straighten the headphone wire, or bring  
FM reception is  
weak.  
the headphone wire.  
the set closer to a window.  
The built-in AM Antenna is Rotate the set or bring the set near a  
AM reception is  
weak.  
directional.  
window.  
11  
IB-CD625(CDR92C-0L8)-WM-E-121803  
 
TECHNICAL SPECIFICATIONS  
CD Player Section  
Frequency response ..............................  
Sampling frequency ................................  
D/A converter .........................................  
Error correction method ..........................  
Pickup ...................................................  
50Hz - 15kHz +1/-2dB  
44.1kHz  
1-bit  
CIRC  
Optical 3-beam semiconductor laser  
(780 nm wavelength)  
Laser diode material GaAIAs  
Laser output less than 44.6µW  
NOTE: This CD player will only play NORMAL music CDs (or CD-R CDs).  
This set will not play CDRW encoded discs.  
Radio Section  
Frequency Range .................................  
AM: 530 - 1700 kHz  
FM: 88 - 108 MHz  
General  
Maximum output (stereo headphones) .....  
Power Supply  
20mW + 20mW  
AC Adaptor Input....................................  
DC .........................................................  
120V/60Hz - 4.5V DC Output (not included)  
3V: Using 2 size “AA” alkaline batteries  
Set Dimensions (approximate)  
Width ................................................  
Depth ...............................................  
Height ..............................................  
Weight (approximate) .............................  
5 1/2"  
6"  
1"  
9.5oz. (270g) (set only)  
12  
IB-CD625(CDR92C-0L8)-WM-E-121803  
 
LIMITED WARRANTY  
We warrant this product to be free from defects in material and workmanship under  
normal use for a period of 90 days after purchase and we will repair it free of charge or  
replace it at no charge, should it become defective under this warranty, providing you  
submit proof of purchase (sales slip) with the set.  
During the initial 90 day period after original purchase, we will service or exchange, at no  
charge, the set that is returned to LENOXX ELECTRONICS CORP. After the initial 90 day  
period expires, and for a period of 12 months from original purchase, we will repair the unit  
covering any part(s) that need to be replaced at no charge, but will charge for the cost of  
labor, return postage paid by Lenoxx.  
This warranty does not apply to any products which have been subject to misuse,  
neglect or accident. This warranty does not cover broken headphones or cabinet.  
UNDER NO CIRCUMSTANCES WILL LENOXX ELECTRONICS CORP. BE LIABLE FOR  
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow the  
exclusion or limitation of incidental or consequential damages, so the above limitations  
or exclusions may not apply to you.  
This warranty gives you specific legal rights, and you may also have other rights  
which vary from state to state. The following charges apply to repairs beyond the  
warranty period: $15.00. Be sure to pack carefully and return postage paid insured  
together with your money order (personal checks will not be accepted) and sales receipt to:  
LENOXX ELECTRONICS CORP. 2 GERMAK DRIVE, CARTERET N.J. 07008  
For customer service  
Dial 1-800-315-5885  
(MONDAY - THURSDAY 9:00 AM - 5:00 PM, FRIDAY 9:00 AM - 1:00 PM EST)  
or Visit Our Website: http://www.lenoxx.com  
© 2004 LENOXX ELECTRONICS CORP.  
2 GERMAK DRIVE  
CARTERET, N.J. 07008  
MADE & PRINTED IN CHINA  
13  
IB-CD625(CDR92C-0L8)-WM-E-121803  
 

LG Electronics TV Receiver HCS5650 User Manual
Listen Technologies Carrying Case LBB 3316 05 User Manual
Logitech Video Game Controller F510 User Manual
Mackie Stereo Amplifier M1200 User Manual
Manhattan Computer Products Computer Keyboard 176408 User Manual
Master Bilt Refrigerator BHC 27 User Manual
Maytag Washer Dryer 16010061 User Manual
Melissa Iron 641 033 User Manual
Melitta Hot Beverage Maker MEK1 User Manual
Metabo Welding System MIG MAG 140 User Manual