Metra Electronics Radio 95 7321 User Manual

INSTALLATION INSTRUCTIONS FOR PART 95-7321  
APPLICATIONS  
Hyundai Accent 2006-2010  
Kia Rio / RIO 5 2006-2010  
Kia Sportage 2005-2010  
95-7321  
KIT FEATURES  
• DDIN Head Unit Provision  
• ISO Stacked Head Unit Provision  
KIT COMPONENTS  
A) DDIN Brackets B) DDIN Trim Plate  
WIRING AND ANTENNA CONNECTIONS (Sold Separately)  
HARNESS:  
• 70-7303 - Hyundai / Kia Harness 2009  
• 70-1004 - Hyundai 2006-up/KIA harness 2004-up  
ANTENNA ADAPTER:  
• 40-KI11 - KIA antenna adapter 2007-up  
• 40-KI10 - KIA antenna adapter 2007-up  
A
B
TOOLS REQUIRED:  
Phillips Screwdriver • Small Flat Blade Screwdriver • Panel Removal Tool • Cutting Tool  
METRA. THE WORLD’S BEST KITS.™  
1-800-221-0932  
© COPYRIGHT 2010 METRA ELECTRONICS CORPORATION  
 
DASH DISASSEMBLY  
95-7321  
HYUNDAI ACCENT 2006-2010  
KIA RIO / RIO 5 2006-2010  
A
Disconnect the negative battery  
terminal to prevent an accidental  
short circuit.  
1
2
Unclip and remove the trim panel  
surrounding the radio and including  
the a/c vents. (Figure A)  
Remove (4) Phillips screws securing  
3
the radio. (Figure B)  
B
1
 
DASH DISASSEMBLY  
95-7321  
KIA SPORTAGE 2005-2010  
A
Disconnect the negative battery  
terminal to prevent an accidental  
short circuit.  
1
2
Unclip and remove the entire panel  
surrounding the radio and including  
the A/C controls. Note: Start at  
bottom of panel. (Figure A)  
Remove (4) Phillips screws to extract  
3
radio from dash. (Figure B)  
B
2
 
KIT PREPARATION  
95-7321  
A
HYUNDAI ACCENT: Cut and remove  
1
shaded areas. (Figure A)  
B
KIA RIO: Cut and remove shaded  
2
areas. (Figure B)  
B
KIA SPORTAGE: Cut and remove  
3
shaded areas. (Figure C)  
3
 
KIT ASSEMBLY  
95-7321  
DOUBLE DIN / STACKED ISO DIN  
HEAD UNIT PROVISION  
Locate the factory wiring harness in  
A
1
the dash. Metra recommends using  
the proper mating adapter from  
Metra or AXXESS. Re-connect the  
negative battery terminal and test  
the unit for proper operation.  
Attach the Double DIN brackets to  
the inside edge of the Double DIN  
trim plate. (Figure A)  
2
3
Slide the Double DIN head unit or  
stacked ISO head units into the  
bracket/radio housing assembly and  
secure the Double DIN head unit or  
stacked ISO head units to the  
B
assembly using the screws supplied  
with the radio. (Figure B)  
Reassemble dash in reverse order of  
disassembly.  
4
4
 
95-7321  
NOTES  
 
95-7321 INSTRUCTIONS  
METRA. THE WORLD’S BEST KITS.™  
1-800-221-0932  
© COPYRIGHT 2010 METRA ELECTRONICS CORPORATION  
INST95-7321  
REV. 04/26/10  
 

KWC Outdoor Shower 28243280000 User Manual
Lantronix Network Card 1 T User Manual
Lenovo Laptop X201LI User Manual
Lenoxx Electronics Portable DVD Player PDV 709 User Manual
Lightolier Indoor Furnishings WX4 User Manual
Lindy Laminator 20975 User Manual
LSI Network Card 7102XP LC User Manual
LST Smoke Alarm IM 10 User Manual
Marley Engineered Products Air Conditioner E3606 1125HFD User Manual
Maytag Washer MAF 1260 User Manual