Lenoxx Electronics CD 566 User Manual

PROGRAMMABLE COMPACT DISC PLAYER  
MODEL CD-566  
OPERATING INSTRUCTIONS  
PLAYS ALL MUSIC COMPACT DISCS, CD-R & CD-RW  
PUSH BUTTON ELECTRONIC VOLUME CONTROL  
6 DIGIT LCD VISUAL DISPLAY  
TRACK REPEAT & DISC REPEAT  
DELUXE STEREO HEADPHONES INCLUDED  
USES 2 SIZE AABATTERIES (NOT INCLUDED)  
PLEASE READ CAREFULLY BEFORE USE  
IB-CD566(CDX35A-0A3)-WM-E-011905  
IB-CD566(CDX35A-0A3)-WM-E-011905(MS).pm1 d  
1/19/2005, 8:45 PM  
POWER SOURCES  
Power your CD player by connecting an optional AC ADAPTOR or by inserting 2  
size AAfresh alkaline batteries.  
1.USING WITH BATTERIES  
Insert two size AAalkaline batteries according to the  
+ and markings on the bottom of the set.  
NOTE: Player will not work, and batteries will be  
drained, if batteries are not inserted as shown  
on the bottom of the set.  
TIPS ON BATTERY USE  
Reversing polarities will damage the batteries and possibly this set. Be sure to  
follow polarity ( + and ) as indicated.  
Do not mix different types together (Alkaline, Carbon-Zinc, Nickel-Cadmium  
etc.), or old batteries with new ones.  
When not in use for an extended period of time, or while internal batteries will not  
be used, remove them to prevent possible acid leakage or corrosion resulting in  
damage to this player.  
When the batteries have become discharged, they must be disposed of in a  
safe manner that complies with all applicable laws.  
Installation of batteries should only be done by an adult (for safety).  
ALKALINE BATTERY LIFE  
Bear in mind that battery life expectancy is based upon volume level.  
Maximum battery power consumption happens at maximum settings. Typical life  
for 2 size AAfresh alkaline batteries is about 8 hours of continuous CD play.  
2.AC ADAPTOR (OPTIONAL)  
Before you buy an optional AC Adaptor, please note, the only AC ADAPTOR suitable  
for this player is DC 4.5V 600mA (or greater), with PLUS center polarity  
.
Others may damage your player. Please check voltage and current (mA) before  
buying an AC ADAPTOR. If you can not find the suitable AC Adaptor in the market,  
please send a $8.00 money order (included shipping and handling) to our customer  
service center to order the adaptor (please also mark the model number of your  
player): LENOXX ELECTRONICS CORP., 2 GERMAK DRIVE, CARTERET N.J. 07008  
WHEN  
SHOWS OR FLASHES IN THE DISPLAY  
While the CD is playing, if the alkaline batteries are weak or discharged, this symbol  
shows or flashes in the display, then the power automatically turns off. If this  
occurs, replace both alkaline batteries (also if the display does not show anything,  
the batteries are dead).  
NOTE: You may use rechargeable batteries on this set. However, because  
rechargeable batteries generally have lower voltage (1.2 volts instead of 1.5  
volts), your playing time will be much less than normal fresh alkaline batteries.  
2
IB-CD566(CDX35A-0A3)-WM-E-011905  
IB-CD566(CDX35A-0A3)-WM-E-011905(MS).pm3 d  
1/19/2005, 8:45 PM  
CD PLAYING  
1 Load the disc.  
Push here  
Disc  
LABEL SIDE UP  
PRESS TO OPEN  
2 Connect the headphones.  
STEREO  
HEADPHONES  
TO PHONES JACK  
3 Press the PLAY/PAUSE button (  
) to turn on the set.  
TRACK NUMBER ELAPSED PLAYING  
CURRENTLY TI ME OF THE  
PLAYING CURRENT TRACK  
PLAY/PAUSE  
BUTTON  
4 Adjust the volume.  
INCREASE  
DECREASE  
NOTE: The default volume level is 20, every time you turn off the CD player and play  
it again, the volume level will go back to 20, you can press the volume control  
(+ or -) buttons to adjust the volume up or down.  
3
IB-CD566(CDX35A-0A3)-WM-E-011905  
IB-CD566(CDX35A-0A3)-WM-E-011905(MS).pm4 d  
1/19/2005, 8:45 PM  
OTHER OPERATIONS  
Operation  
Display window shows  
Press  
To pause play  
PLAY/PAUSE button  
TRACK NUMBER  
CURRENTLY  
PLAYING  
PLAYING TIME  
FLASHES  
To release pause  
and resume play  
PLAY/PAUSE button  
STOP button  
TRACK NUMBER  
CURRENTLY  
PLAYING  
PLAYING TIME  
ADVANCES  
To stop play  
TOTAL TRACKS  
TOTAL PLAYING  
TIME  
Press the STOP button once and wait 30 seconds, or  
press STOP button twice quickly.  
To turn off the power  
To skip to the next  
track(s)  
once (or repeatedly)  
once (or repeatedly)  
To skip to the previous  
track(s)  
Keep  
depressed and release it when the desired  
music section of the disc is found.  
If you press and hold the SKIP button (  
) while the  
To go ahead at high  
speed (search for-  
ward)  
last track is playing, and the end of the track is  
reached, the music stops and the display will show  
the total tracks and total playing time of the CD, then  
the power will shut itself off after 30 seconds.  
Keep  
depressed and release it when the desired  
To go back at high speed  
(search backward)  
music section of the disc is found.  
NOTE:This set is not designed for jogging and doesnt have skip protection. The  
sound may skip or stop when the set is shaken or quickly moved.  
4
IB-CD566(CDX35A-0A3)-WM-E-011905  
IB-CD566(CDX35A-0A3)-WM-E-011905(MS).pm5 d  
1/19/2005, 8:45 PM  
REPEAT, INTRO AND RANDOM PLAY  
You may have repeat, intro or random play using the REPEAT button. Press the RE-  
PEAT button several times, and the display will show the followings in turn:  
REPEAT 1  
REPEAT ALL  
INTRO  
RANDOM  
NORMAL PLAY  
REPEAT  
SINGLE TRACK REPEAT  
x 1  
Plays one song over and over till you press STOP.  
During play, select the song you want to repeat with either  
of the SKIP buttons (  
or  
), then press the REPEAT  
button once, the symbol REPEAT 1 will show in the display.  
REPEAT 1  
The song currently playing will repeat over and over, until  
you press STOP.  
REPEAT x 2  
ALL TRACKS REPEAT (DISC REPEAT)  
Repeats all songs in order till you press STOP.  
During play, press the REPEAT button twice, the symbol  
REPEAT ALL will show in the display.  
All songs will keep playing in sequence 1, 2, 3, etc. and  
when finished, will start all over again until you press  
the STOP.  
REPEAT ALL  
INTRO PLAY  
This plays the first 10 seconds of songs in  
sequential order.  
REPEAT  
1. During play, press the REPEAT button three times,  
the symbol INTRO will flash in the display.  
2. Press the PLAY/PAUSE button, the symbol INTRO  
will stop flashing and the first 10 seconds of each  
song on the CD will play in sequential order.  
3. When you find a song you like, press the PLAY/PAUSE  
button, the symbol INTRO will disappear from the  
display, normal play will be resumed, that song (and  
the following songs) will play normally.  
x 3  
INTRO  
RANDOM PLAY  
REPEAT  
This plays the songs on the disc in a random order.  
1. During play, press the REPEAT button four times,  
the symbol RANDOM will flash.  
x 4  
2. Press the PLAY/PAUSE button, this will play all of the  
songs in random order selected by the CD player.  
The RANDOM will stop flashing.  
3. Press the SKIP button  
song.  
RANDOM  
to skip to the next random  
IB-CD566(CDX35A-0A3)-WM-E-011905  
5
IB-CD566(CDX35A-0A3)-WM-E-011905(MS).pm6 d  
1/19/2005, 8:45 PM  
PROGRAMMED PLAY  
The tracks (songs) on the disc can be programmed (arranged in advance) to play in  
any order you prefer (up to 20 tracks can be programmed).  
Programming Example  
etc.  
etc.  
Program Number  
Track Number (song number)  
1
3
2
5
3
8
4
1
5
2
6
4
7
1
8
1
During programming, the symbol PROG (program) flashes in the display. To program  
songs to play in your preferred order, follow steps below:  
1.Press the PROGRAM button.  
Program #2 will now show in the display,  
ready for your next selection of track.  
PROG  
.
PROG  
The symbol PROG and “  
will flash  
in the display.  
4. Repeat steps 2 and 3 to program other  
tracks till you finish (up to 20 selections).  
5. After programming is finished, press the  
PLAY button to begin programmed play.  
The symbol PROG shows in the display  
and music begins.  
PRO G  
Program number  
PLAY/PAUSE  
2.Press the SKIP button (  
or  
) to  
select track number 3 (example). The  
symbol PROGand “ ” will flash in the  
display.  
SKIP  
NOTE:  
- The player will stop automatically after  
all programmed tracks have been  
played.  
- To quit programmed play, press STOP  
button once. Then you may press PLAY/  
PAUSE button to restart normal play.  
PROG  
Track number  
Your programmed memory will be  
lost:  
3.Press the PROGRAM button to confirm.  
The track 3 is now programmed.  
When the power is off, or the CD Door  
is opened.  
PROG  
.
When the alkaline batteries are  
exhausted or removed, or the AC  
ADAPTOR is disconnected.  
6
IB-CD566(CDX35A-0A3)-WM-E-011905  
IB-CD566(CDX35A-0A3)-WM-E-011905(MS).pm7 d  
1/19/2005, 8:45 PM  
MAINTENANCE  
Handling Compact Discs  
cause skipping or noise.  
Cleaning the lens  
Dirty, scratched or warped discs may  
A dirty lens will cause sound skipping. If  
the lens is very dirty, the player may not  
work. We suggest using a special  
cleaning disk (not included) available in  
most music and Hi-Fi stores. However,  
if you do not have one, you may use the  
instructions below.  
Handle the disc only by the edges. To  
keep clean, do not touch its surface.  
Discs should be stored in their cases  
after use to avoid scratches.  
Do not expose discs to direct sunlight,  
Use  
a
cotton swab very slightly  
high humidity, high temperatures, or  
dust, etc. Prolonged exposure to  
extreme temperatures can warp the  
disc (such as leaving the discs in your  
car during summertime).  
dampened with alcohol to clean the lens.  
Cleaning the cabinet  
Wipe with a soft cloth. If the cabinet is  
very dirty, dampen (not dripping wet) the  
cloth with a weak solution of soapy water,  
and then wipe clean.  
Do not stick or write anything on either  
side of disc. Sharp writing instruments,  
or the inks used in some felt-tipped pens,  
may damage its surface.  
Cleaning the Discs  
Fingerprints should be carefully wiped  
To remove the Disc  
from the surface of disc with a soft  
cloth. Unlike conventional records,  
compact discs have no grooves to  
collect dust and microscopic dirt, so  
gently wiping them with a soft cloth  
should remove most particles. Wipe  
in a straight motion from the center to  
the edge.  
Open the CD DOOR by pressing the CD  
DOOR OPEN button, hold the disc by the  
edge while slightly pressing on the center  
spindle as illustrated, then lift it from the  
edge to release and remove.  
NOTE:  
Never use thinner, benzine, record  
Always press the STOP button and wait  
cleaner or antistatic spray on a compact for the disc to stop rotating before  
disc. Such chemicals can damage its pressing the CD DOOR OPEN button to  
plastic surface.  
remove the disc.  
7
IB-CD566(CDX35A-0A3)-WM-E-011905  
IB-CD566(CDX35A-0A3)-WM-E-011905(MS).pm8 d  
1/19/2005, 8:45 PM  
SAFETY PRECAUTIONS  
Do not take the set apart. The laser beam used in the set may harm your eyes. Refer  
servicing to qualified service personnel only.  
Do not insert pins or coins, clips, or any objects inside the set.  
This set is equipped with a safety device which automatically turns the laser beam off  
when the disc door is opened.  
Do not drop the set or subject it to strong shocks. Doing so could result in damage.  
Do not place the set in locations where the temperature is high, or in humid or dusty  
locations, or locations with long heavy vibrations, or tilted surfaces.  
The sets cabinet may warp or the set may otherwise be damaged if it is placed in  
direct sunlight, near heaters (where the temperature is 1400F/600C or higher) or in  
cars with the windows closed. In the summer, the temperature may get as high as  
2120F/1000C or more.  
Use the set within a temperature range of 410F/50C to 950F/350C.  
Use ONLY the optional DC 4.5V 600mA AC Adaptor with polarity  
, others  
may damage this set. Disconnect the Adaptor from the wall outlet when the set is not  
to be used for an extended period of time (3 days or more).  
When cleaning this set, use a soft dry cloth. Do not use solvents or commercially  
available cleaners, as they may damage or discolor the finish.  
Do not wear headphones while operating a motor vehicle. This could create a traffic  
hazard and is illegal in many areas. Do not use this set when bicycling or running.  
The headphones supplied with this set provide superb stereo listening while allowing  
you to hear some outside sounds when listening at normally low volume levels.  
Listening at extremely high volume levels minimizes the intrusion of outside noise/  
sounds. In the interest of safety, it is strongly advised against the use while engaging  
in activities where the exclusion of external sounds (whistles, horns, sirens, traffic,  
etc.) could be hazardous. Also loud volume can hurt your ears. If you notice that the  
sound has become weak or distorted or if tracks do not change, this is an indication  
that the batteries are weak. Replace both batteries at the same time (see USING  
WITH BATTERIES).  
This CD-566 is identified by a serial number located in the BATTERY COMPARTMENT.  
Record this number in the space provided below.  
Model CD-566  
Serial No.  
Date Purchased:  
This Instruction Manual contains detailed information on its safety and use. Please  
read it carefully so that you may take full advantage of its many features, and ensure  
a safe reliable operation. Keep this Instruction Manual for future reference.  
CONDENSATION  
If cold water is poured into a glass, water droplets form on the outside of the glass. This  
is called condensation. Condensation may occur on internal operating parts of the lens.  
Condensation occurs:  
When the set is brought from the cold outdoors into a warm room, or if it is in a cold room  
to a room which is heated, or in the summer, if the set is moved from an air-conditioned  
room or car to a hot or humid location.  
Should condensation occur, the set may not operate properly. Open the CD DOOR and  
wait for about 20 minutes (to allow the internal parts to adjust to the surrounding  
temperature) before using the set.  
8
IB-CD566(CDX35A-0A3)-WM-E-011905  
IB-CD566(CDX35A-0A3)-WM-E-011905(MS).pm9 d  
1/19/2005, 8:45 PM  
IMPORTANT INFORMATION REQUIRED BY THE FCC  
Since the CD circuitry may cause interference to other radios nearby, switch this  
set off when not in use or move it away from the affected radios.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the  
following two conditions: (1) This device may not cause harmful interference, and  
(2) This device must accept any interference received, including interference that  
may cause undesirable operation.  
NOTE: This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful interference  
in a residential installation. This equipment generates, uses and can radiate  
radio frequency energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
SAFETY CERTIFICATION  
This Compact Disc Player is made and tested to meet safety standards of the FCC  
requirements and compliance with safety performance of the U.S. Department of Health  
and Human Services, and also with FDA Radiation Performance Standards 21 CFR  
Subchapter J.  
WARNING  
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.  
LASER SAFETY  
THIS SET EMPLOYS AN OPTICAL LASER BEAM SYSTEM IN THE CD MECHANISM,  
DESIGNED WITH BUILT-IN SAFEGUARDS. DO NOT ATTEMPT TO DISASSEMBLE.  
EXPOSURE TO THIS INVISIBLE LASER LIGHT BEAM MAY BE HARMFUL TO HUMAN  
EYES. THIS IS A CLASS-1 LASER PRODUCT. USE OF ADJUSTMENTS OTHER THAN  
THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS LASER LIGHT BEAM  
EXPOSURE. THIS COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR  
REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE PERSONNEL. THE LASER  
MECHANISM IN THE SET CORRESPONDS TO THE STYLUS (NEEDLE) OF A RECORD  
PLAYER. ALTHOUGH THIS PRODUCT USES A LASER PICK-UP LENS, IT IS  
COMPLETELY SAFE WHEN OPERATED ACCORDING TO DIRECTIONS.  
9
IB-CD566(CDX35A-0A3)-WM-E-011905  
IB-CD566(CDX35A-0A3)-WM-E-011905(MS).pm10d  
1/19/2005, 8:45 PM  
TROUBLE SHOOTING  
Causes  
Solutions  
Symptoms  
Replace both batteries with fresh  
alkaline batteries. Battery life with  
fresh batteries is about 8 hours for  
continuous CD play (rechargeable  
batteries have 1/2 of that life).  
Batteries are weak (they  
may test OK on tester but  
they are weak for CD  
operation).  
Tracks  
do  
not  
change or set does  
not play normally.  
Replace both batteries with fresh  
ones.  
Dead or weak batteries.  
CD Player will not  
turn on.  
The  
optional  
AC Check the optional AC ADAPTOR  
ADAPTOR not connected connection at AC outlet and the  
properly.  
right of the set.  
Re-insert disc with label side  
facing up.  
Disc inserted incorrectly.  
Replace the disc (this set will not  
play damaged or scratched CDs),  
or buy a disc repair polisher to  
repair it yourself.  
Disc scratched or dirty.  
Disc will not play.  
Try another compact disc, this set  
will not play MP3 or WMA discs.  
Defective compact disc.  
CD DOOR not closed.  
Close the door securely.  
Take out the CD disc and leave  
the CD Door open for about 20  
minutes to dry the moisture  
condensation.  
Moisture has formed  
inside the CD deck.  
No sound from  
headphones.  
Replace with fresh batteries or  
use the optional AC ADAPTOR.  
Weak batteries.  
The compact disc or lens is  
dirty or CD is scratched.  
Clean or replace the compact disc  
or clean the lens.  
Sound is skipping or  
sound stops.  
This set is not designed for jog-  
ging and doesnt have anti-skip  
protection function.  
The set is shocked.  
Lower the VOLUME control by  
pressing the decrease ( ) button.  
Music is too loud.  
Weak batteries.  
Sound is distorted.  
Replace both batteries or use the  
optional AC ADAPTOR.  
Remove batteries and the optional  
AC ADAPTOR. Wait 15 seconds  
and re-insert. Make sure batteries  
are fresh or the optional AC  
ADAPTOR has power.  
Buttons do not  
work.  
Electronic or static error  
caused circuitry to lock.  
10  
IB-CD566(CDX35A-0A3)-WM-E-011905  
IB-CD566(CDX35A-0A3)-WM-E-011905(MS).pm11d  
1/19/2005, 8:45 PM  
TECHNICAL SPECIFICATIONS  
General  
Maximum output (stereo headphones)............  
Power Supply  
20mW + 20mW  
AC Adaptor Input ..........................................  
DC ................................................................  
120V/60Hz-4.5V, 600 mA DC Output (optional)  
3V: Using 2 size AAalkaline batteries  
(not included)  
Set Dimensions (approximate)  
Width ..........................................................  
Depth ..........................................................  
Height .........................................................  
Weight (approximate) ........................................  
5 5/8"  
6 1/8"  
1"  
9.5oz. (270g) (set only)  
CD Player Section  
Frequency response .........................................  
Sampling frequency ..........................................  
D/A converter ....................................................  
Error correction method ....................................  
Pickup ..............................................................  
50Hz - 15kHz +1/-2dB  
44.1kHz  
1-bit  
CIRC  
Optical 3-beam semiconductor laser  
(780 nm wavelength)  
Laser diode material GaAIAs  
Laser output less than 44.6µW  
NOTE:This CD player will play NORMAL music CDs (or CD-R/CD-RW CDs).  
Because the products are subject to continuous improvement, LENOXX reserves the  
right to modify product designs and specifications without notice and without incurring  
any obligation.  
LIMITED WARRANTY  
We warrant this product to be free from defects in material and workmanship under normal use for  
a period of 90 days after purchase and we will repair it free of charge or replace it at no charge, should  
it become defective under this warranty, providing you submit proof of purchase (sales slip) with the set.  
During the initial 90 day period after original purchase, we will service or exchange, at no charge,  
the set that is returned to LENOXX ELECTRONICS CORP. After the initial 90 day period expires, and for  
a period of 12 months from original purchase, we will repair the unit covering any part(s) that need to be  
replaced at no charge, but will charge for the cost of labor, return postage paid by Lenoxx.  
This warranty does not apply to any products which have been subject to misuse, neglect or  
accident. This warranty does not cover broken headphones or cabinet. UNDER NO CIRCUMSTANCES  
WILL LENOXX ELECTRONICS CORP. BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL  
DAMAGES. Some states do not allow the exclusion or limitation of incidental or consequential damages,  
so the above limitations or exclusions may not apply to you.  
This warranty gives you specific legal rights, and you may also have other rights which vary from  
state to state. The following charges apply to repairs beyond the warranty period: $6.00. Be sure to pack  
carefully and return postage paid insured together with your money order (personal checks will not be  
accepted) and sales receipt to:  
LENOXX ELECTRONICS CORP., 2 GERMAK DRIVE, CARTERET N.J. 07008.  
For customer service Dial: 1-800-315-5885  
(MONDAY - THURSDAY 9:00 AM - 5:00 PM, FRIDAY 9:00 AM - 1:00 PM EST)  
© 2005 LENOXX ELECTRONICS CORP.  
2 GERMAK DRIVE  
CARTERET, N.J. 07008  
MADE & PRINTED IN CHINA  
11  
IB-CD566(CDX35A-0A3)-WM-E-011905  
IB-CD566(CDX35A-0A3)-WM-E-011905(MS).pm12d  
1/19/2005, 8:45 PM  

Kalorik USK CM 32764 User Manual
iHome iH27 User Manual
Fujitsu MPB3054AT User Manual
FieldServer Weigh Tronix FS 8700 36 User Manual
Emerson CKS2235 User Manual
Clickfree HD525 User Manual
Bunn Coffeemaker F 20 User Manual
Black Box Computer Accessories KVT6S1UV User Manual
Alpine CDA 7875 User Manual
ABB TPS48 F32 User Manual