Lenoxx Electronics CR 186 User Manual

®
CASSETTE PLAYER  
WITH AM / FM CLOCK RADIO  
MODEL CR-186  
OPERATING INSTRUCTIONS  
WAKE UP TO TAPE, RADIO OR ALARM  
AM/FM RADIO RECEIVER  
ELECTRONIC DIGITAL CLOCK  
PLAYS ALL STANDARD CASSETTE TAPES  
EASY TO SET CLOCK FUNCTIONS  
PM & AUTO INDICATORS  
SNOOZE BUTTON  
SLEEP TO MUSIC  
BATTERY BACK-UP (9V BATTERY, NOT INCLUDED)  
PLEASE READ CAREFULLY BEFORE USE  
CR-186_032200 NLv.2 E  
IMPORTANT SAFETY INSTRUCTIONS  
12. Cleaning - The appliance should be cleaned only as recommended by the manufacturer.  
13. Nonuse periods - The power cord of the appliance should be unplugged from the outlet  
when left unused for a long period of time.  
14. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids  
are not spilled into the enclosure through openings.  
15. Damage Requiring Service - The appliance should be serviced by qualified service  
personnel when:  
A. The power supply cord or the plug has been damaged; or  
B. Objects have fallen, or liquid been spilled into the appliance; or  
C. The appliance has been exposed to rain; or  
D. The appliance does not appear to operate normally or exhibits a marked change in  
performance; or  
E. The appliance has been dropped, or the enclosure damaged.  
16. Servicing - The user should not attempt to service the appliance beyond that described  
in the operating instructions. All other servicing should be referred to qualified service  
personnel.  
17. Power lines - An outdoor antenna should be located away from power lines.  
18. Outdoor Antenna Grounding - If an outside antenna is connected to the receiver, be  
sure the antenna system is grounded so as to provide some protection against voltage  
surges and built up static charges. Section 810 of the National Electrical Code, ANSI/  
NFPA 70 provides information with respect to proper grounding of the mast and  
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of  
grounding conductors, location of antenna-discharge unit, connection to grounding  
electrodes, and requirements for the grounding electrode. See Figure.  
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE  
ANTENNA  
LEAD IN WIRE  
GROUND  
CLAMP  
ANTENNA DISCHARGE  
UNIT (NEC SECTION  
810-20)  
ELECTRIC  
SERVICE  
GROUNDING  
CONDUCTORS  
EQUIPMENT  
(NEC SECTION 810-21)  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
CR-186_032200 NLv.2 E  
2
LOCATION OF CONTROLS  
TOP VIEW  
8
6
7
9
5
10  
11  
4
3
2
1
FRONT VIEW  
BOTTOM VIEW  
12 13  
14  
20  
21  
19  
18  
17  
16  
15  
1. SLEEP BUTTON  
12. CASSETTE PLAY BUTTON  
2. ALARM SET/OFF BUTTON  
3. HOUR SET BUTTON  
13. CASSETTE FAST FORWARD BUTTON  
14. CASSETTE STOP BUTTON  
4. FUNCTION SWITCH (BUZZ/AUTO/OFF/ON) 15. CLOCK DISPLAY  
5. BAND SWITCH (AM/FM)  
6. MINUTE SET BUTTON  
7. TIME SET BUTTON  
8. SNOOZE BUTTON  
9. CASSETTE DOOR  
16. AUTO INDICATOR LAMP (ALARM ON)  
17. PM INDICATOR LAMP  
18. AC POWER CORD  
19. EARPHONE JACK (EARPHONE NOT INCLUDED)  
20. 9V BATTERY COMPARTMENT (AT BOTTOM)  
(FOR OPTIONAL BATTERY BACK-UP)  
21. FM ANTENNA WIRE  
10. VOLUME CONTROL  
11. TUNING CONTROL  
(STRETCH OUT FOR BEST FM RECEPTION)  
CR-186_032200 NLv.2 E  
3
OPERATING INSTRUCTIONS  
Your new AM/FM CLOCK RADIO CASSETTE PLAYER is a specially designed all solid state  
set which, with proper care, will give you years of trouble-free service.  
Powering Up  
Plug the AC POWER CORD into a 120V, 60Hz wall outlet . The CLOCK DISPLAY will light up or  
flash indicating the power is on.  
NOTE:  
ONE BLADE OF THE PLUG IS WIDER  
THAN THE OTHER. ALSO DO NOT USE  
AN OUTLET CONTROLLED BY A WALL  
SWITCH.  
NOTE: This cord is polarized. This means the cord will only fit one way into the socket or wall  
outlet. If it does not fit, do not force it, just reverse it and try again.  
BATTERY BACK-UP  
If the AC cord is disconnected or if there is a short time power failure, this electronic clock and  
timer are designed to continue operating internally (without showing in the display) if a 9 volt  
battery (not included) is installed.  
To connect the battery, locate the BATTERY COMPARTMENT on the bottom of the set. Open  
the BATTERY COMPARTMENT by pushing in on the tab, open the door, and connect the  
battery to the terminals of the battery snap inside the compartment (Alkaline battery is  
recommended). Replace the battery compartment door. The back-up battery will keep your  
alarm and time setting to avoid your having to reset these if power fails.  
NOTE: Be sure to check the condition of the battery every few months by disconnecting the  
AC cord and connecting it again 2 or 3 minutes later. The preset times will show. If the  
time flashes, it indicates the battery is dead or not connected properly.  
The radio will work fine without this back up battery.  
BATTERY PRECAUTION  
Follow these precautions when using a battery in this device:  
1. Use only the size and type of battery specified (9 volt)  
2. Be sure to follow the correct polarity when installing the battery as indicated in the battery compartment .  
3. If the device is not to be used for a long period of time, remove the battery to prevent damage or injury from  
possible battery leakage.  
4. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture (Follow  
battery manufacturer’s directions).  
Setting the Clock  
1. Press the TIME set button together with the HOUR set button until the display shows the  
desired hour.  
2. Press the TIME set button together with the MINUTE set button until the display shows the  
desired minutes.  
NOTE: When the PM indicator is off, the time is AM (advance 12 hours to change from AM  
to PM).  
CR-186_032200 NLv.2 E  
4
OPERATING INSTRUCTIONS  
Setting the Alarm Time  
1. Press the ALARM/OFF button to check the alarm time.  
2. Press the ALARM/OFF button together with the HOUR set button until the display shows  
the desired alarm hour time  
3. Press the ALARM/OFF button together with the MINUTE set button until the display shows  
the desired alarm minutes.  
4. Make sure the PM lamp is not on if you want clock to wake you in the morning.  
5. Release the ALARM/OFF button, the display will show the normal time of the day.  
NOTE: Again check the PM indicator. To change PM to AM, advance 12 hours.  
Playing the Radio  
1. Slide the FUNCTION switch to ON position.  
2. Slide the BAND switch to either AM or FM.  
3. Turn the TUNING control to your desired station.  
4. Adjust the VOLUME control to your favorite listening level.  
5. Slide the FUNCTION switch to OFF position to shut off the radio.  
For best AM reception, rotate the radio or move it near the window. For best FM reception,  
unwind and fully stretch the FM antenna wire.  
WARNING: Do not connect the FM antenna wire to an outdoor antenna.  
F ull S pool  
E m pty S pool  
Playing the Cassette  
1. Slide the FUNCTION switch to ON position. The radio  
will come on.  
2. Insert a prerecorded cassette tape into the cassette  
compartment door with the full spool to the left and the  
exposed tape facing you (see sketch). Press the  
cassette PLAY button to start playing the tape.  
3. Adjust the VOLUME control to your favorite level.  
4. Press the cassette STOP button to stop the tape. The  
radio will come on.  
5. To shut the radio, slide the FUNCTION switch to OFF  
or AUTO.  
AUTOMATIC STOP  
This set has a built-in automatic stop and the tape mechanism will stop playing and shut off  
when it has reached the end of the tape. After the tape finishes playing, the radio will come on.  
This is normal. You may re-insert the tape again to play cassette and press cassette PLAY  
button or to stop the radio, slide the FUNCTION switch to OFF or AUTO.  
MANUAL STOP  
The tape played can be stopped manually by pressing the cassette STOP button. The radio will  
come on. To stop the radio, slide the FUNCTION switch to OFF or AUTO.  
Using Earphones  
You may enjoy the music without disturbing others  
by plugging the earphone (not included) into the  
earphone jack.  
CR-186_032200 NLv.2 E  
5
OPERATING INSTRUCTIONS  
Waking to Radio  
1. Set the alarm time as previously instructed. Set the FUNCTION switch to ON position.  
2. Slide the BAND switch to AM or FM band, and tune your favorite station. Make sure the  
VOLUME control is set sufficiently loud to wake you up.  
3. Slide the FUNCTION switch to AUTO position and the AUTO indicator will light up.  
NOTE: Your set is now ready to turn on automatically at your selected alarm time. If you do  
not change the time, your set will wake you every day at same time (make sure  
alarm time is set for AM or PM correctly).  
Waking to Cassette Player  
1. Set the alarm as previously instructed.  
2. Insert your tape as instructed on page 5, press the cassette PLAY button down. Slide the  
FUNCTION switch to AUTO position and the AUTO indicator will light up.  
NOTE: Your cassette player is now ready to turn on automatically at your selected alarm  
time. Make sure the VOLUME control is set loud enough to wake you up, and the  
tape is not at the end.  
Waking to Buzzer  
1. Set the alarm time as previously instructed.  
2. Slide the FUNCTION switch to BUZZ position. The AUTO indicator will light up.  
3. The buzzer alarm is now set to turn on automatically at the time selected by the alarm.  
Alarm Off  
There are 2 ways to shut the alarm.  
1.Press ALARM/OFF button. This will shut the alarm for that day only. Next day the radio will  
wake you again at the same time.  
2.Slide the FUNCTION switch to OFF position to shut the alarm or buzzer. However, remember  
to slide the switch back to AUTO or BUZZ, otherwise you will not be woken the next day by  
this set .  
Snooze Control  
When you are woken up by this set but wish to sleep a few minutes more, simply press the  
SNOOZE button.  
The radio, buzzer or tape alarm will go off for 9 minutes and then come on again. This can be  
repeated in a row (to shut off the alarm, press the ALARM/OFF button).  
Sleep Control  
1. To turn the radio on for about 1 hour, press the SLEEP button.  
2. Pressing the SLEEP button will allow the radio or tape to play 59 minutes or 1 hour and 59  
minutes before it turns itself off. The required sleep time can be set by holding the SLEEP  
button and simultaneously pressing the HOUR set button or MINUTE set button until the  
desired number of minute is displayed. Release both buttons, the radio or tape will play for  
that amount of time and then shut itself off.  
NOTE: If you decide to turn the radio off before the playing time has expired, simply press the  
SNOOZE button.  
NOTE: The operation of the sleep function will not affect the wake-up operation of the clock if  
the FUNCTION switch is in the AUTO (or BUZZ) position.  
CR-186_032200 NLv.2 E  
6
MAINTENANCE  
Cleaning Tape Heads and  
Tape Path  
Wipe the heads, the pinch roller and the  
capstan with a cleaning swab slightly  
moistened with cleaning fluid or alcohol  
after every 10 hours of operation for  
optimum playback and recording quality.  
Notes for Cassette Tapes  
1. Do not put a tape near a magnetic field,  
such as a TV, or speaker. Magnetic  
fields may reduce the tape sensitivity  
or even erase the recording.  
2. Do not store tape for any length of time  
in a hot, moist or dusty place.  
RECORD / PLAY BACK HEAD  
PINCH ROLLER  
ERASE HEAD  
CAPSTAN  
COTTON SWAB  
After cleaning, insert a tape when the  
areas cleaned are completely dry.  
Precautions for Tapes  
Before insert the tape into the cassette  
player, check that there are no loose layers  
of tape visible through the cassette center  
window. Take up these loose layers using  
a pencil or ball-point pen before inserting  
the cassette into the player.  
Cleaning the Cabinet  
Clean the cabinet, panel and controls with  
a soft cloth slightly moistened with a mild  
detergent solution. Do not use any type of  
abrasive pad, scouring powder, or solvent,  
such as alcohol or benzene.  
PROTECT YOUR FINE FURNITURE!  
WE RECOMMEND A CLOTH OR OTHER PROTECTIVE MATERIAL BE PLACED UNDER THE SET WHEN  
PLACING IT ON SURFACE WITH A NATURAL OR LACQUER FINISH.  
CR-186_032200 NLv.2 E  
7
TROUBLE SHOOTING (Helpful Hints)  
SHOULD YOUR SET EXHIBIT A PROBLEM, CHECK THE FOLLOWING BEFORE SEEKING  
SERVICE.  
SYMPTOM  
CAUSE  
SOLUTION  
AM or PM not set correctly. Is  
alarm time set in AM range (PM  
Lamp off)?  
Advance the clock 12 hours.  
Alarm does not  
come on in the  
morning.  
FUNCTION switch is in OFF  
position. Is the AUTO Lamp off?  
Set the FUNCTION switch to  
AUTO or ALARM position.  
FM antenna wire is not extended.  
Extend FM antenna wire.  
FM is distorted and  
weak.  
Tune to desired station  
carefully.  
Station not tuned in properly.  
Weak broadcast station.  
Signal is blocked.  
Turn to a stronger Station.  
Rotate the set to receive better  
signal.  
Noise or weak  
sound on AM  
broadcasts.  
Turn the radio for better AM  
reception or bring set near a  
window.  
External interference.  
FUNCTION switch is in the OFF  
position.  
Slide the FUNCTION switch to  
ON position.  
No sound.  
VOLUME control set to minimum  
position.  
Rotate VOLUME control for  
desired sound.  
The clock is not set.  
Set the clock and alarm time.  
The clock is  
flashing.  
Reset the clock alarm time and  
time of the day.  
A power failure has occurred.  
The set’s AC cord is not  
connected.  
Connect set’s AC cord and  
make sure outlet has power.  
Clock is dead.  
Cassette PLAY  
button pops up  
Reverse the tape, re-insert and  
press PLAY.  
Tape has reached its end.  
Tape sound  
distorted  
Tape head, capstan and pinch  
roller dirty.  
Clean tape head, capstan and  
pinch roller.  
Erratic or slow  
tape speed  
Tape old or worn.  
Use a different tape.  
LENOXX reserves the right to make design and specification changes for product improvement.  
CR-186_032200 NLv.2 E  
8
SPECIFICATIONS  
source:  
Power  
AC 120V, 60Hz, 8W  
DC 9V battery  
Dimensions:  
for backup time memory (optional, alkaline  
batteries are recommended)  
9" (Length)  
4 1/4" (High)  
2 3/4" (Depth)  
Frequency range:  
FM 88 - 108MHz  
AM 530 - 1700kHz  
LIMITED WARRANTY  
We warrant this product to be free from defects in material and workmanship under  
normal use for a period of 90 days after purchase and we will repair it free of charge or  
replace it at no charge, should it become defective under this warranty, providing you  
submit proof of purchase (sales slip) with the set.  
During the initial 90 day period after original purchase, we will service or exchange, at  
no charge, the set that is returned to LENOXX ELECTRONICS CORP. (LENOXX will pay  
the shipping back to you). After the initial 90 day period expires, and for a period of 12  
months from original purchase, we will repair the unit covering any part(s) that need to be  
replaced at no charge, but will charge for the cost of labor, return postage paid by LENOXX.  
This warranty does not apply to any products which have been subject to misuse,  
neglect or accident. This warranty does not cover broken headphones or cabinet. UNDER  
NO CIRCUMSTANCES WILL LENOXX ELECTRONICS CORP. BE LIABLE FOR ANY  
INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow the exclusion  
or limitation of incidental or consequential damages, so the above limitations or exclusions  
may not apply to you.  
This warranty gives you specific legal rights, and you may also have other rights which  
vary from state to state. The following charges apply to repairs beyond the warranty  
period: $8.00. Be sure to pack carefully and return postage paid insured together with your  
money order (personal checks will not be accepted) and sales receipt to :  
LENOXX ELECTRONICS CORP.  
2 GERMAK DRIVE, CARTERET N.J. 07008  
For customer service  
Dial 1-800-315-5885 (MONDAY - THURSDAY 09:00 AM - 5:00 PM, FRIDAY 09:00 AM - 1:00 PM EST)  
or Visit Our Website: http://www.lenoxx.com  
© 2000 LENOXX ELECTRONICS CORP.  
2 GERMAK DRIVE  
CARTERET, N.J. 07008  
MADE & PRINTED IN CHINA  
CR-186_032200 NLv.2 E  
9

Microsoft Windows 7 Professional With Service Pack 1 64 Bit FQC04649 User Manual
Intelligent Motion Systems Computer Drive IM481H User Manual
Huawei Technologies Cell Phone M860 User Manual
HTCONEUNLOCKEDBLACK User Manual
GPX CI189B User Manual
GE 169199 User Manual
GBC SHREDMASTER 1636SE User Manual
Esoteric K 03 User Manual
APC SMT 3000 VA User Manual
ABB PFCL 201CE User Manual